Autofiber Mitt [Clay Mitt] Paint Decontamination Mitt 7"x9"
Autofiber Mitt [Clay Mitt] Paint Decontamination Mitt 7"x9"

[Clay Mitt] Paint Decontamination Mitt 7"x9"

Designer: Autofiber

$ 15.00
$ 15.00
$ 15.00
Sold Out
SKU CLAY-MITT-1
Pack Qty:
Size:

GSM is "grams per square meter". It represents the weight of the material one meter square. Larger numbers are heavier, with more microfiber and more absorbent.

Blend is the ratio of polyester to polyamide. Higher ratio of polyamide is usually softer and more absorbent.

Material is the type of weave and physical feel of the surface yarn.

Examples: Terry, Suede, Waffle-Weave, Twist.

Made in

Remove surface contaminates like break dust, industrial fallout, overspray and environmental pollution with the easy to use Decon Clay Mitt. The synthetic rubber polymer pulls embedded debris from the clear coat surface leaving it smooth and ready for paint correction.

The Clay Bar Wash Mitt should always be used with a clay lubricant or quick detail spray designed to lubricate the surface when decontaminating. New mitts should be broken in by agitating on a glass surface for 1-2 min. with the lubricant. Spray the mitt and surface being cleaned with lubricant and gently rub in a crosshatch pattern applying more lubricant as needed. Thoroughly rinse the mitt with water and air-dry when done.

  • Remove embedded debris from paint and glass surfaces.
  • Synthetic Rubber Polymer on Microfiber Mitt
  • Rinse out with water and air dry when done.
  • Use with clay lubricant or quick detail spray.
  • Medium Grade.